PA & Stuudio helitehnika

2 Channel Fantom Power Unit.

• 12v / 48v 
• Frequency Response 10Hz-20KHz 
• Noise Level -100dBu (22Hz -22KHz,Input Shorted) 
• THD+N (10Hz-22KHz) 0.013%typ.@1V RMS,1KHz 
• Inputs: Two XLR connectors, Balanced 
• Outputs: Two XLR connectors, Balanced 
• DC input 12V, 300mA 
• Dimensions: 158 x 100 x 50 mm 
• Weight: 0.4 kg

RME toiteplokk toodetele FFUCX/UC/400, MF-II, Babyface, ADI-2, ADI-4 DD, QuadMic.

• 1 kO resister
• IEC Connector
• In 100-240V/50-60 Hz
• Out 12V/2A

Designed for musicians and performers who demand mobility without compromising audio quality, the HP2 stereo personal headphone amplifier is a great choice for driving wired in-ear monitors (IEMs), as well as headphones. Portable and compact, it offers two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control and can be powered by a 9V battery or a DC power supply. Operation can be switched between stereo and mono, and a Pan knob is provided. A 2m audio cable is included.

• Battery-powered, stereo headphone amplifier
• Inputs: 2 female XLR connectors
• Output: stereo, 1/8" phone connector
• Power: 9V battery or DC power supply
• Volume and Pan control knobs

Placing studio monitor speakers directly on a hard surface such as a desk or unpadded stand can result in vibration and surface coupling that affects the sound of your speakers. PreSonus® ISPD-4 isolation pads eliminate this problem by acoustically isolating the speakers from the surface. The pads come in pairs that can be split into four halves, so you can use the entire pad, use half a pad for a small speaker, or separate the two halves and use both for extra width, such as with a horizontally placed speaker.

• Provides acoustical isolation for studio monitors
• Reduces vibration and surface coupling
• Can be divided into two sections to accommodate larger widths
• Capable of seven positioning options
• Dimensions (WxDxH): 10.4" (265 mm) x 13" (330 mm) x 1.6" (40 mm)

The S Curve 131 is a professional quality signal processor that gives you precise tonal control over a mono audio signal. Center detented sliders with LED illumination allow you to selectively cut or boost selected frequency areas by as much as 12 dB. Front panel controls include output level sliders, a variable Lowcut filter, as well as Cut Only, Range and Bypass switches. The rear panel provides electronically balanced inputs and outputs on 1/4-inch and XLR connectors. Thanks to low noise circuitry, the S curve 131 can be used in a wide variety of applications, including live performance (in conjunction with either Front Of House or monitor mixers), in broadcast environments, or for recording. S Curve 131 is the perfect choice for professionals looking for a single 31-band EQ solution in a single rackspace.

• 1/3 octave 31 band graphic equalizer 
• Constant Q circuitry
• Balanced XLR and TRS inputs and outputs 
• Variable low cut, cut only, and bypass mode 
• Switchable 6 or 12 dB filter 
• LED faders and LED bar VU meter
• Single rackspace

The PreSonus® Studio Channel channel strip is a wonderful studio tool that's great for live performance, too. Featuring a tube preamp, VCA-based compressor, and three-band EQ, it delivers a huge variety of timbres. With XLR mic, balanced ¼-inch line, and unbalanced ¼-inch instrument inputs and balanced XLR and ¼-inch outputs, you can connect it to almost any audio interface, amp or PA.

The Class A preamp starts with a high-output 12AX7 tube for lots of headroom and big tone. Gain and Tube Drive controls enable a wide range of sounds, from transparent and clear to edgy and overdriven. A -20 dB pad, 80 Hz high-pass filter and polarity reverse let you tweak your signals.

Our VCA-based compressor is known for musicality and fast attack, with the ability to tame the fastest transients so you can record blazing-hot signals with accurate dynamics control. In addition to ratio, threshold, attack, release and gain controls, it offers an Auto Attack/Release feature with preset attack and release curves. The backlit VU meter displays gain reduction or output gain.

The three-band EQ is a precision tool that can be pre- or post-compressor, and you can bypass each stage independently. Custom-designed amps deliver sweet-sounding gain and cut for smooth highs, clear midrange and deep, solid lows. The midrange band is fully parametric, with variable Q, while the high- and low-frequency bands are semi-parametric, with Frequency and Gain controls, and can be shelving or peak bands.

• Class A 12AX7 vacuum-tube mic/instrument preamplifier with Tube Drive control
• Gain control with +10 dB to +54 dB gain range
• 48V phantom power switch, 80 Hz high-pass filter, -20 dB pad, and Polarity-reverse switch
• Fully Variable VCA compressor with Attack, Release, Ratio, Threshold, and (makeup) Gain; Auto Attack/Release switch; Soft/Hard Knee switch; and Bypass switch
• 3-band parametric equalizer with Gain, Frequency and Q controls (mid band); Gain and Frequency controls and Shelving/Peak switches (low and high bands); switchable pre-/post-compressor; Bypass switch
• Backlit VU meter with Gain Reduction to Meter switch (gain reduction or output gain)
• 1 unbalanced ¼-inch instrument input (front panel), 1 balanced ¼-inch line input, and 1 balanced XLR mic input
• 1 balanced ¼-inch and 1 balanced XLR line output
• 1U 19-inch rack-mountable, rugged steel chassis with sealed, detented rotary controls
• External 16 VAC power supply

10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) / 1 Stereo Bus / 1 AUX (incl. FX)

• 10-Channel Mixing Console
• Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo)
• 1 Stereo Bus
• 1 AUX (incl. FX)
• “D-PRE” mic preamps with an inverted Darlington circuit
• 1-Knob compressors
• High-grade effects: SPX with 24 programs
• PAD switch on mono inputs
• +48V phantom power
• XLR balanced outputs
• Metal chassis
• Dimensions(W×H×D): 244 mm x 71 mm x 294 mm (9.6"x 2.8"x 11.6")
• Net Weight: 2.1 kg (4.63 lbs.)

The new FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. 

• 700W + 200W – 129.5 DB SPL
• 10” LF woofer with 2” voice coil 
• 1’’ exit throat HF compression driver with 1” voice coil 
• Frequency response from 58Hz to 20 kHz 
• Extremely lightweight: only 11Kg?
• 2-way, bi-amplified bass reflex design cabinet  
• 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply 
• DSP with 4-EQ presets 
• Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch  
• 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate  
• 90°H x 60°V constant directivity horn 
• Stage monitor angling facility with 12°, 40° or 55° taper

The FBT XLITE 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 110A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XLITE 110A cabinet also allows use as a powered floor stage monitor. 

• 2 way bi-amplified bass reflex system
• Polypropylene moulded enclosure
• Custom 10" woofer (LF) / 2.5" voice coil
• 1" throat / 1.4" voice coil HF compression driver
• 1200w / 300w Built-In amplifier (LF / HF)
• Bluetooth 5.0
• 3-Channel mixer
• 4 DSP Presets
• 30 degrees & 45 degrees monitor tapers
• Universal switch mode power supply 100-240 VAC
• M10 rigging points