PA & Stuudio helitehnika

Although you could play an arena rock concert with much less than the DV Mark G 1000’s impressive 1000 watts, having so much power at your disposal allows you to play with incredible dynamics and enables your cabinets to handle high signal peaks without clipping. Vaata lähemalt

Vaata lähemalt

Vaata lähemalt

FBT HiMAXX 40a - 2-Way Bi-Amping 500W RMS Class D amplifier for the 1x 12" neodymium woofer, 150W RMS class G amplifier for the 1x 1" horn/driver. Dimensions: 407 x 634 x 370mm (W x H x D). Weight: 17.9kg Vaata lähemalt

Vaata lähemalt

FBT HiMaxx 100SA Subwoofer - active bandpass, 18" B&C neodymium speaker with 3" spool, 900W (RMS), 133dB maximum SPL, integrated 900W (RMS) PWM power amp, signal processor with built-in limiter, XLR Neutrik combo inputs and outputs, speaker stand flange, ground lift switch, 0°-180° phase switch, 18mm birch ply cabinet, 8x M10 flying points, 2x recessed handles. Dimensions: 530 x 605 x 655mm. Weight: 43kg Vaata lähemalt

FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x 345mm. Weight: 15kg Vaata lähemalt

FBT ProMaxx 10a, active fullrange speaker, 10" 1" B&C Neodym, biamped switchmode amp witht 600 Watt LF + 300 Watt HF, 58 - 20.000 Hz, 90° x 60°, internal DSP with 8 switchable EQ-Presets, 3 wedge angles : 12°, 40° and 55°, XLR in/out, Volume, HP Filter, Ground-Lift Switch, 2x M10 flying points, 35mm pole mount, dimensions: 320 x 550 x 275 mm, weight 11,2 Kg, black plastic housing Vaata lähemalt

FBT ProMaxx 15a Active Subwoofer - B&C neodymium driver, switched mode amp, 1200W, 38-120Hz, 136 dB SPL max, XLR in/out, volume, HP filter, ground lift switch, DSP with 8 EQ presets, 180° phase reverse, 15mm plywood housing, M20 thread. Dimensions: 507 x 585 x 605mm. Weight: 28.5kg Vaata lähemalt

The Evo2MaxX 2a is an active 10" speaker with a B&C 1" compression driver Featuring a 400W + 100W RMS 128dB SPLwith all new DSP encapsulated in a sturdy, gas-injected polypropylene molded enclosure.

• 2-way, bi-amplified, bass reflex design cabinet.
• 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT.
• 25mm (1”) throat exit B&C HF compression driver.
• Frequency response from 58Hz to 20 kHz.
• Biamped: 400w RMS LF, 100w RMS HF, Class D power amplifiers with switch mode power supplies.
• Digital Signal Processor with 4 Equalization Presets.
• Control Panel: features balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3 status LED indicators.
• 90°H x 60°V Constant Directivity Horn.
• Sturdy gas-injected polypropylene molded enclosure with one integrated handle and Stage Floor Monitor taper.
• 2 x M10 suspension points, 35mm (1⅜”) top-hat speaker stand socket, wall bracket mount flange plate.
• Enclosure suitable for stacking.
• Extremely light, Net Wt. only 12 kg.

Vaata lähemalt