Mikrofonid
INV04820
Thread adapter with an external diameter of 18 mm. Female thread 3/8“. Male thread 1/4“. Vaata lähemaltINV04821
Thread adapter with an external diameter of 20 mm. Female thread 3/8“. Male thread M 10 mm. With a width across flats of 17. Vaata lähemaltINV04822
The reducing thread adapter M 20 male threaded bolt fits with a M20 x 1.25 mm female thread. Microphone rods can be connected to base plates. Vaata lähemalt15111
Connects to top of mic stands for holding 2 microphones or boom arms. 3/8" locking screws, adjustable from 60 to 172 mm. Vaata lähemalt16137
21,00 €Connects to top of mic stands for holding 4 microphones or boom arms. 3/8" locking screws. Vaata lähemalt16138
17,00 €Attaches to stands with diameter up to 30 mm. 3/8" threaded bolt for attaching goosenecks and mic clips. Vaata lähemalt18675
Phantom power supply adapter/mixer, battery-operatedVaata lähemalt- For supplying power to two microphones with 4-pole mini XLR plug (e.g. CX...W series, headband microphones and lavalier microphones of the CX/CM series)
- Allows operation at mixers, home recorders or similar devices without integrated +48 V phantom power
- Separate volume controls for the two microphones
19950
215,00 €Audix T365-CA, OM5 capsule for wireless systems, dynamic, hyper-cardioid, 144 dB SPL max, 48 - 19.000 Hz, 200 Ohms, 2mV/Pa, suitable for Audix Wireless-Systems and for Shure/Line6 handheld transmitter with optional Sound Tools Adapter Vaata lähemalt20811
Audix T-50 K, Inline Impedance transformer for low impedance mikrophones to high impedance jack inputs, XLR Female > jack, cable 10 cm long Vaata lähemaltINV02559
The König & Meyer Quick Release Adapter makes quickly switching of microphones or other accessories on stage or in studio easier. The adapter consists of two components. The lower section is screwed into the 3/8" or 5/8" microphone stand thread, and the upper section is screwed on using a 3/8" or 5/8" microphone clamp or holder or to other accessories. The lower section ensures the secure and flexible hold of the upper section through 8 punched bore holes. The upper section is used to remove or click the microphone into place using the quick-release adapter. By pressing the scored plastic handle on the upper section both sections can either be disconnected or clicked in place. The adapter is made of high-quality aluminum. A thread adapter is included with the delivery for 5/8" threading. Both adapter components can be left attached to the stand i.e. on the microphone/accessories. Vaata lähemalt
