(+372) 6 31 38 36   info@muusik.ee

0товар(ов)

В корзине нет товаров

Product was successfully added to your shopping cart.

Микрофоны

Сортируется по возрастанию. Установить по убыванию

   

Позиции с 141 по 150 из 158

  1. INV04820

    Thread adapter with an external diameter of 18 mm. Female thread 3/8“. Male thread 1/4“. Подробнее
  2. INV04821

    Thread adapter with an external diameter of 20 mm. Female thread 3/8“. Male thread M 10 mm. With a width across flats of 17. Подробнее
  3. INV04822

    The reducing thread adapter M 20 male threaded bolt fits with a M20 x 1.25 mm female thread. Microphone rods can be connected to base plates. Подробнее
  4. Connects to top of mic stands for holding 2 microphones or boom arms. 3/8" locking screws, adjustable from 60 to 172 mm. Подробнее
  5. Connects to top of mic stands for holding 4 microphones or boom arms. 3/8" locking screws. Подробнее
  6. Attaches to stands with diameter up to 30 mm. 3/8" threaded bolt for attaching goosenecks and mic clips. Подробнее
  7. Phantom power supply adapter/mixer, battery-operated
    • For supplying power to two microphones with 4-pole mini XLR plug (e.g. CX...W series, headband microphones and lavalier microphones of the CX/CM series) 
    • Allows operation at mixers, home recorders or similar devices without integrated +48 V phantom power 
    • Separate volume controls for the two microphones
    Подробнее
  8. Audix T365-CA, OM5 capsule for wireless systems, dynamic, hyper-cardioid, 144 dB SPL max, 48 - 19.000 Hz, 200 Ohms, 2mV/Pa, suitable for Audix Wireless-Systems and for Shure/Line6 handheld transmitter with optional Sound Tools Adapter Подробнее
  9. Audix T-50 K, Inline Impedance transformer for low impedance mikrophones to high impedance jack inputs, XLR Female > jack, cable 10 cm long Подробнее
  10. INV02559

    The König & Meyer Quick Release Adapter makes quickly switching of microphones or other accessories on stage or in studio easier. The adapter consists of two components. The lower section is screwed into the 3/8" or 5/8" microphone stand thread, and the upper section is screwed on using a 3/8" or 5/8" microphone clamp or holder or to other accessories. The lower section ensures the secure and flexible hold of the upper section through 8 punched bore holes. The upper section is used to remove or click the microphone into place using the quick-release adapter. By pressing the scored plastic handle on the upper section both sections can either be disconnected or clicked in place. The adapter is made of high-quality aluminum. A thread adapter is included with the delivery for 5/8" threading. Both adapter components can be left attached to the stand i.e. on the microphone/accessories. Подробнее
Сортируется по возрастанию. Установить по убыванию

   

Позиции с 141 по 150 из 158