ПА и Студийное оборудование

The Eris® E66 studio monitor delivers an expanded, highly accurate frequency response and the widest stereo field available in its class. Its nested Midwoofer-Tweeter-Midwoofer (MTM) configuration offers improved off-axis response and spatial resolution. The result is a more consistent listening experience, smoother frequency response, and an ultra-wide, detailed stereo soundstage.

• Nested MTM (D'Appolito) design with dual woven composite drivers provides smooth on- and off-axis response with more dynamic output than conventional two-way studio monitor configurations
• MTM (D'Appolito) design minimizes phase displacement and leads to improved spatial resolution and a much wider sweet spot
• Dual 6.5-inch, custom-woven Kevlar LF/midrange drivers produce dynamic, size-defying bass output
• 1.25-inch, silk-dome HF driver ensures smooth high-frequency performance that is never fatiguing to the ears
• 140W Class A/B bi-amplification for an open, clear, and less fatiguing listening experience
• Includes Studio Magic, a suite of over $1000 USD worth of music production software

2-Way Biamped, Active 6.5-Inch Coaxial Studio Monitors.

Listen to your mixes reproduced with lifelike realism! The Eris® Pro 6's symmetric design and consistent acoustic center provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

• Single point-source coaxial design for wider sweet spot and better phase alignment
• 6.5-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140W, Class AB amplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, @ 1 meter)
• Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
• XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
• Power Saver mode (engages after 40 minutes)
• Wall and ceiling mountable

• Matched Pair - limited special model
• Coordinated monitors for increased playback precision
• Equipped with: 6.5" Woofer (60 W) and 1" tweeter (35 W)
• Power: 95 W (Bi-Amp)
• Bass reflex system
• Frequency range: 43 - 30,000 Hz
• Balanced input via XLR and 6.3 mm jack
• Input level adjustable
• Room control and High-Trim tone control
• Dimensions per monitor (W x H x D): 210 x 332 x 284 mm
• Weight per monitor: 8.2 kg
• Package quantity: 1 Pair

5.25-Inch 2-Way Active Studio Monitors With EBM Waveguide.

Building on the reputation of its award-winning predecessors, the Eris® Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

• 5.25-inch woven composite low-frequency driver
• 1-inch, ultra-low mass, silk-dome, high frequency driver
• Crossover Frequency, 3.5 kHz
• 120˚ x 60˚ EBM waveguide provides a sweet spot
• Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
• 80W, Class AB dual amplification
• 48 Hz to 20 kHz frequency response
• 102 dB Peak SPL (@ 1 meter)
• Acoustic Tuning Controls:
• Acoustic Space (Flat, -2 dB, -4 dB)
• High Frequency (±6 dB, center 10 kHz, continuously variable)
• Mid Frequency (±6 dB, center 1 kHz, continuously variable)
• Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
• Inputs:
• XLR and 1/4-inch TRS balanced rear-panel inputs
• RCA unbalanced rear-panel inputs
• Protection:
• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• Power Saver mode (engages after 40 minutes)

Alpha 50 Evo is the ideal loudspeaker for proximity control. Thanks to its technologies, including a 13 cm Slatefiber woofer, it offers plenty of dynamics and mix detail, a highly neutral tonal balance that remains identical at both low and high volumes, and excellent sound coherence, whatever the listening environment. Its compact design and multiple functions make it a versatile piece of equipment.

• Excellent dynamics
• Wide dispersion enabling the same sound to be maintained throughout the entire room
• Slatefiber cone manufactured in France: sound neutrality, no distortion
• Identical tonal balance at both low and high volume
• Connect up to 3 audio sources
• Inserts for wall fastening
• Protective grills included

With its tweeter and its Woofer 16.5 cm with Slatefiber membrane, two speakers signed focal, Alpha 65 Evo is a monitoring enclosure with dynamics, the neutrality of tonal balance and excellent sound consistency, whatever the Listening place. Its compactness and great versatility make it discreet and efficient equipment for all professionals.

• Excellent dynamics
• Wide dispersion enabling the same sound to be maintained throughout the entire room
• Slatefiber cone manufactured in France: sound neutrality, no distortion
• Identical tonal balance at both low and high volume
• Connect up to 3 audio sources
• Inserts for wall fastening
• Protective grills included

Versatility, discretion and studio performance. The benchmark in the Alpha Evo line, Alpha 80 is particularly recommended for high sound levels and extended subwoofers. With its 21 cm woofer with Slatefiber cone, this amplified monitoring loudspeaker offers great neutrality across the entire spectrum and excellent dynamics with very low distortion.

• Excellent dynamics
• Wide dispersion enabling the same sound to be maintained throughout the entire room
• Slatefiber cone manufactured in France: sound neutrality, no distortion
• Identical tonal balance at both low and high volume
• Connect up to 3 audio sources
• Inserts for wall fastening
• Protective grills included

The versatile Solo6 2-way monitor offers unrivalled definition, transparency, dynamics and soundstage precision. Thanks to its Focus Mode, it forms two monitors in one, keeping you in the sweet spot when mixing, saving console space and simplifying cabling and monitor changes.

• Beryllium inverted dome tweeter: very low directionality, excellent linearity and dynamics
• Optimised baffle tweeter: excellent dispersion control
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Focus mode: two monitors in one; 2-way monitor and 1-way full-range monitor (woofer alone) • Large laminar port: no port noises or distortion
• Inserts for wall fastening
• Automatic disengageable stand-by mode
• Settings: activatable/deactivatable, LF shelving, HF shelving, LMF @ 160Hz

Adding a subwoofer to full-range speakers enables you to hear the low-frequency foundation of your mix more accurately so you can make better-informed decisions and create more translatable mixes. The surprisingly loud, 100 watt Eris® Sub 8BT drops down to a molar-rattling 30 Hz, so you'll hear the full sonic spectrum and produce better mixes. For EDM and hip-hop producers, in particular, a subwoofer is a must-have.

• 8-inch composite low-frequency driver
• Bluetooth® 5.0 wireless audio stereo input
• 50W RMS, Class AB power amplifier
• 30 Hz to 200 Hz frequency response
• 100 dB SPL (Peak, @ 1 meter)
• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris® Sub 8BT outputs to the main speakers
• Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
• Left and right, balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
• Polarity invert switch
• Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
• Power Saver mode (engages after 40 minutes)

Powerful and musical, the PreSonus® Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

• 10-inch, front-firing, glass-composite, low-frequency transducer
• Front-firing, bass-reflex acoustic port
• Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
• Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
• 170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
• Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10