Kitaranupit

Marshall AmpCover C57, Cover for Marshall 2061X Head, Leather Imitation, Color: Black, Dimensions WHD: 50 x 21 x 21 cm Read more

JCM2000 Series 60W Triple Super Lead Valve Head. Made in UK.

• Power:: 60W RMS
• Channels: 3
• Preamp: 4 x ECC83 valves
• Poweramp: 2 x EL34 tubes
• Independent EQ for each channel
• Mid Boost switch at Clean channel
• Deep Switch at Clean and Crunch/Lead channels
• Tone Shift at Crunch and Lead channels
• Spring reverb with adjustment for Clean and Drive channels
• Emulated line output, (XLR)
• Virtual Power Reduction
• Output Mute
• Effect Loop (Footswitchable, with Mix pot)
• Dimensions: 748 x 297 x 214 [mm]
• Weight: 22.5 [kg]
• Marshall MR-PEDL 00021 (FS-05D) - 5-button footswitch for TSL 60, TSL100 & TSL122 with LED and 8m cable, bolted sheet steel construction, break protection and cable entry, 6-pole DIN socket. Inscription: ´Clean - Crunch - Lead - Reverb - FX

Read more

FEATURES 50-Watt valve head Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp Master Volume with two Gain Controls — Detail (highs) & Body (lows) Two footswitchable Dynamic Ranges — Low & High Mid Boost switch Footswitchable Proprietary digital Plate Reverb Series FX loop with level switch and bypass Read more

Uncover the variety of tones that the 100W JVM210HTM has to offer. Express and mix anything from sparkling cleans to dirty distortion. With an outstanding sound palette and diverse features, you can flaunt your personality whether performing live on stage, recording or rehearsing. This two channel amplifier also has an LED indicator to help guide you through the modes of each channel.

Read more

The Marshall 1923, 85th anniversary guitar combo, is a very special guitar amplifier. An exact replica of the one off unit designed, hand finished and presented to the Late Jim Marshall O.B.E. at his 85th birthday celebration in July 2008, the 1923 is based on the legendary JCM 2000 Dual Super Lead platform and delivers that distinctive Marshall tone in spades. Don’t be fooled though . . . this is not simply a rebadged DSL50 head! Read more

The Marshall Haze 15 watt head is a compact and portable, valve-driven performance all tube amplifier. The Haze 15 head is a tube head powered by a pair of 6V6 valves and ECC83 pre-amp valves. Great Marshall crunch! Two 8-Ohm and one 16-Ohm speaker output jacks to run a single cabinet or a full stack. Reverb, Echo, Chorus and Vibe on-board effects. 2-way footswitch (channels and effects) is included. Read more

Read more

Marshall MG100HCFX programmable electric guitar head.

• 100 watts
• 4 analoge channels
• fully storeable
• two effects can be used at the same time - reverb and one of: chorus, flanger, phaser, octaver, vibrato and delay (4 delay modes: studio, tape, multi-tap, revers)
• separate delay adjustment
• headphone out with speaker simulation
• Mp3/line in
• programable FX-loop (serial)
• programable damping (2xFDD styles)
• incl. 2-way footswitch
• all access with optional footswitch "STOMPWARE" (# 223005)
• dimensions: 591 x 249 x 275 mm
• weight: 11,4kg
• finish: carbon-kevlar

Read more

The DSL100H has two gain channels to produce that legendary Marshall sound with rich functionality for those who require flexibility and unquestionable quality. The amp can move between two sounds within each gain channel, so that players can create and release their personality through sound.

Read more

Marshall DSL100H guitar head - 100W. Made in UK.

• tubes: 4x ECC83 and 4x EL34
• 2 channels: classic gain & ultra gain
• independent volume & gain controls for both channels
• clean & crunch modes for classic gain channel
• lead1 & lead2 modes for ultra gain channel
• classic tone control with bass, middle & treble, presence control
• tone shift switch
• variable resonance control
• adjustable deep-switch
• pentode/triode switch
• digital-reverb for each channel
• speaker outputs: 2 x 8 Ohms & 1 x 16 Ohms
• incl. footswitch (channel select and reverb on/off)
• weight 24,2 kg
• dimensions (w x h x t): 74,5 x 27,5 x 24,5 cm

Read more