Kitara- ja bassoefektit

Pedals need clean isolated power and Fender's Engine Room® LVL8 Power Supply is capable of the task. Featuring eight ground isolated power outlets, (6) are capable of delivering 9Vdc at 500mA while (2) additional outlets provide switchable voltage (9v/12v/18v) via 3-way toggle or slide switch. Perfect for performance or studio players and can be daisy-chained with our LVL12 for players looking for more tonal variety.

• 8 ground isolated outputs - 6 outlets fixed 9Vdc at 500mA and 2 outlets with switchable voltage (9v/12v/18v)
• Global mains input voltage (100-240Vac) 50/60Hz for use anywhere in the world
• Standard IEC mains voltage connector
• Dimensions: Width: 9.6" (244mm), Height: 1.65" (42mm), Depth: 3.59" (91.3mm)
• 5V USB-A and USBC output for charging smart devices
• Cable kit included:
• 4 x 2.1mm barrel connector 24" (60cm) length
• 2 x 2.1mm barrel connector 18" (45cm) length
• 2 x 2.1mm barrel connector 12" (30cm) length
• 1 x 2.5mm to 2.1mm barrel
• 1 x 2.5mm to 2.1mm barrel reverse polarity
• 1 x 3.5mm TS to 2.1mm barrel
• 1 x 9V Battery clip to 2.1mm barrel

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

• Compact noise suppression pedal for eliminating noise and hum in guitar and bass effects and amplifier setups
• Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound
• Threshold and Decay knobs allow for shaping the elimination/suppression as desired
• BOSS 5-year warranty

Express yourself! Fender’s Tread-Light™ Volume/Expression Pedal helps you control your stage volume for enhanced dynamic performance and also acts as an expression pedal for use with other effects pedals and keyboards. Its special under-treadle LED provides easy visibility onstage under any light, and its durable chassis and treadle are crafted from lightweight anodized aluminum, with a rubberized pad ideal for the rigors of live performance. The switchable LED indicates when the pedal is active and ready for use.

• Analog Volume/Expression pedal
• Top mounted jacks
• Switchable under-treadle LED
• Treadle torque is adjustable for comfort
• Expression output requires 1/4" TRS cable

The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

One-touch digital system that anyone can operate. It's as easy as plugging in a guitar cable, thus enabling you to concentrate more on a performance.

One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources. This elegant solution allows you to play guitar wirelessly and still use a pedalboard, all while maintaining a reliable connection.

• One touch ease-of-use
• 2.4 GHz digital transmission for worldwide operation
• 75m range (250ft) in optimal conditions
• Up to 5 hours battery life on a single charge
• Switch between multiple transmitters linked to one receiver
• Configure any combination of transmitters and receivers
• Mute from either transmitter or receiver

The Pentatone Equalizer is a standalone version of the 5-band equalizer section in the Ibanez Pentatone Preamp. Adding a continuously variable Q control on each band, which allows for a wider variety of sound creation, enables even more detailed sound creation. Furthermore, the ±9V power supply circuitry provides a wide headroom. That makes the parametric equalizer suitable for not only electric guitars but also higher-level output signal equipment such as electric bass guitars and keyboards.

• Controls: 5-band frequencies, 5-band levels, 5-band Q controls, Master Level
• True bypass
• I/O’s: INPUT, OUTPUT
• Size: 100(W) x 123(D) x 63(H) (mm)
• Size: 3.9(W) x 4.8(D) x 2.5(H) (inch)
• Weight: 690g, 1.5lb (including Battery)
• Required Current: 125mA@9V
• Power Supply: One 9V battery (006P) or external AC adapter

A graphic equalizer that allows you to set the frequency range and Q width tailored for guitar tone shaping. With Nutube in the preamp section, raising the level adds distinctive tube harmonics and compression. Choose frequency bands of 100Hz/250Hz/570Hz/800Hz/2.2kHz/5.6kHz, designed for intuitive tone shaping. To facilitate active tone shaping, the frequency bands are set to be more effective by widening the Q width compared to a typical graphic equalizer. It’s easy to use for switching between backing and solo, as well as for overall adjustments. The inclusion of Nutube in the preamp provides a musical distortion when the level is increased. The absence of a center click is intentionally designed for easy and fine adjustments.

Set the low frequencies lower and the high frequencies higher for a clean tone arpeggio, ensuring each string sounds distinct. Boost the mids for easy solo articulation, or set it sharp for creating a sharp sound in heavy backing. The versatility allows for various sound options.