Kitaraefektit

MXR and Third Man Hardware have teamed up to create the perfect booster for gigging guitar players—this pedal combines two separate MXR Micro Amp circuits into a single box so that you can heat up two separate signal chains with just the right amount of classic Micro Amp bump.

This pedal is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ ECB003EU, or an MXR Brick Series power supply.

The Hammertone™ Fuzz captures the iconic splat, saturation and horn-like sustain used on the formative records of rock’n’roll history. Despite its small size, this purple-tinged, psychedelic stompbox is feature-packed with three classic controls, two silicon diodes and an octave fuzz mode – allowing you to recreate the legendary sounds of the ‘60s & ‘70s or forge your own unique tone.

• Fender®-Designed Fuzz Circuit
• Optional Octave-Fuzz Switch
• Top Mount Input/Output Jacks
• True-Bypass Switching
• Powered by 9-Volt Battery or Center Negative AC Adaptor, Not Included

The DOD Carcosa Fuzz is a doorway into an alternate fuzz universe, where classic tones of legend coexist with splattered and shattered Pollock abstractions. Combining the Carcosa’s wide-ranging AFTER bias control with two toggle positions creates tones that range from porcine fatness to dessicated shards. This versatility makes the Carcosa Fuzz a good companion for dirty or clean amps. True bypass, tons of output, and the visage of the King in Yellow sets the stage for fuzzy madness. The DOD Carcosa Fuzz has an exaggerated mid-range and treble character that help it stand out in a mix. It has been designed to cut through a dense and heavy band but still have great note articulation with chords. However, when extreme bias (AFTER) ranges are selected many wild and over-the-top sounds are possible.

The Super Badass Variac Fuzz is aggressive, biting, and highly versatile, featuring a Variac control to change the pedal's voltage from 5V to 15V for a range of fuzz tones. Go from vintage saggy saturation to wide open transparency with the twist of a knob.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Bassman® pedals have all your basses covered. Drawing inspiration from the original tube amp line that laid way for Fender’s sub-sonic signal processing, the Bassman pedal line hosts a collection of meticulously crafted analog and digital circuits all curated from the ground up for bass-centric tonal expansion. With three controls, two slide switches, a footswitch and top-mounted connections, the pedals are extremely user-friendly and take up little space on the pedalboard.

Thick and woolly bass fuzz for the ages: cramming decades of bass fuzz tones into a small footprint, the Bassman Fuzz pedal offers two voices of speaker-pumping grit and all the right controls to keep your low end solid. Beyond offering fur drenched, riff-ready gain, this buffer-friendly fuzz can be tamed to balance with your clean lows using the three-position focus switch and blend knob. Select where the fuzz sits in the mix from three focus frequencies: full frequency band, just the mid and high frequencies, or high frequencies only – with each setting leaving plenty of room to blend in the right amount of your clean signal underneath the fuzz.

• Voice switch selects between compressed vintage fuzz or touch-sensitive modern fuzz
• Internal tone control adjusts the high frequency content of the fuzz
• Soft-touch relay true bypass with auto bypass when no power is present
• Side mounted pad switch to suit active basses
• Top mounted jacks and road-ready aluminum enclosure
• Inset aluminum face plate draws in vintage Fender aesthetics

The sound of rock’n’roll – from light drive to heavy crunch, guitar wouldn’t be the same without it. 
The Hammertone™ Distortion delivers the legendary distorted tones you need for nearly any style of music. The active 2-band Bass and Treble EQ controls provide modern tone-shaping flexibility, while the pedal board-friendly top-mounted in & out jacks and true bypass footswitch mean it will integrate seamlessly into your rig.

• Fender®-Designed Analog Distortion Circuit
• 2-Band Active Bass & Treble EQ
• Top Mount Input/Output Jacks
• True-Bypass Switching
• Powered by 9-Volt Battery or Center Negative AC Adaptor, Not Included

Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

Aggressive and dynamic distortion can be elusive - with powerful tone-shaping EQ controls, top-mounted in & out jacks and true bypass switching, the Hammertone™ Metal delivers chunky high gain that sits perfectly in a mix and will integrate seamlessly into your rig.

• Fender®-designed High Gain Distortion Circuit
• 2-Band Active Bass & Treble EQ
• Top Mount Input/Output Jacks
• True-Bypass Switching
• Powered by 9-Volt Battery or Center Negative AC Adaptor, Not Included

Released in 1988, the Guv'nor set the bar for future generations of distortion pedals. This reissue faithfully recreates the classic sound of The Guv’nor, providing a smooth overdriven sound with a touch of compression. The pedal is housed in a casing that is accurately modelled on the original, from the unique shape right down to the individually coloured control knobs. All that’s missing are the stories collected over 30+ years of use, but that’s where you come in.