PA- ja studiolaitteet

20W+20W Stereo Valve Power Amplifier.

• 2x20W lamps
• Fan in front
• 1xECC82 2xECC83 and pre-amplification
• 4xEL84 in power stage
• 2 entries Jack 6.35
• Jack 6.35 6 outputs (2 line out, 2 outputs 8ohms, 16ohms 2 outputs)
• Remote control socket for the Deep function.

Read more

Marshall EL34 50/50 Head Valve Kit Fitted with 2 Electro Harmonix EL34 Platinum Matched Quartets output valves and Electro Harmonix pre-amp valves.

• 4 x Electro Harmonix EL34 Platinum Single
• 2 x Electro Harmonix ECC83/12AX7
• 2 x Electro Harmonix ECC81/12AT7

We recommend this set of valves that we regard them as a great upgrade to the stock valves fitted In the Marshall EL34 50/50 Head. You will experience Excellent tonal balance, harmonic content, low noise floor, and low microphonics ,with Nice, warm tone. We recommend that you check your BIAS setting when fitting the output.

Read more

300 Watt Mixing Amplifier with Reverb and Delay

Read more

Although you could play an arena rock concert with much less than the DV Mark G 1000’s impressive 1000 watts, having so much power at your disposal allows you to play with incredible dynamics and enables your cabinets to handle high signal peaks without clipping. Read more

Read more

FBT HiMaxx 100SA Subwoofer - active bandpass, 18" B&C neodymium speaker with 3" spool, 900W (RMS), 133dB maximum SPL, integrated 900W (RMS) PWM power amp, signal processor with built-in limiter, XLR Neutrik combo inputs and outputs, speaker stand flange, ground lift switch, 0°-180° phase switch, 18mm birch ply cabinet, 8x M10 flying points, 2x recessed handles. Dimensions: 530 x 605 x 655mm. Weight: 43kg Read more

FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x 345mm. Weight: 15kg Read more

FBT ProMaxx 10a, active fullrange speaker, 10" 1" B&C Neodym, biamped switchmode amp witht 600 Watt LF + 300 Watt HF, 58 - 20.000 Hz, 90° x 60°, internal DSP with 8 switchable EQ-Presets, 3 wedge angles : 12°, 40° and 55°, XLR in/out, Volume, HP Filter, Ground-Lift Switch, 2x M10 flying points, 35mm pole mount, dimensions: 320 x 550 x 275 mm, weight 11,2 Kg, black plastic housing Read more

FBT ProMaxx 15a Active Subwoofer - B&C neodymium driver, switched mode amp, 1200W, 38-120Hz, 136 dB SPL max, XLR in/out, volume, HP filter, ground lift switch, DSP with 8 EQ presets, 180° phase reverse, 15mm plywood housing, M20 thread. Dimensions: 507 x 585 x 605mm. Weight: 28.5kg Read more

The J15a is an Active speaker featuring a 15" Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W+ 100W RMS – 129DB SPL and a standard 35mm pole mount.

• 2-way processed active system
• Polypropylene enclosure
• 1 x 15" custom woofer
• 1 x 1" neodymium silk dome tweeter
• 300W/70W built-in amplifier cont. RMS LF/HF
• 350W/100W built-in amplifier max. RMS LF/HF
• 700W/200W built-in amplifier max. peak LF/HF
• 2 x M10 suspension points
• 4 DSPpresets
• Completely manufactured in Italy

Read more