Other Studio Equipment
11519
The SX21 is a 24dB/Octave two-way frequency crossover intended for sound reinforcement applications. It has a 1/4" input, Low and High frequency 1/4" Outputs, a single variable Crossover Frequency, separate Low and High Output level controls. It is powered by an included adapter. Read moreINV01980
€99.00LED mixer light with gooseneck Angled 4-pin XLR connector Length: 450 mm Color: Black Read moreINV07666
2 Channel Fantom Power Unit.
- 12v / 48v
- Frequency Response 10Hz-20KHz
- Noise Level -100dBu (22Hz -22KHz,Input Shorted)
- THD+N (10Hz-22KHz) 0.013%typ.@1V RMS,1KHz
- Inputs: Two XLR connectors, Balanced
- Outputs: Two XLR connectors, Balanced
- DC input 12V, 300mA
- Dimensions: 158 x 100 x 50 mm
- Weight: 0.4 kg
INV07864
Rackmount adaptor to mount all half 19" RME units.
Compatible to: Multiface 2, Fireface 400, Fireface UC, Fireface UCX, Fireface UCX II, QuadMic 2, MADIface XT, ADI-2, ADI-2 FS, ADI-2 Pro, ADI-2 Pro FS, ADI-2 Pro FS BE and AVB Tool.
Read moreINV07894
The RME BF2USBC is a right-angle USB Type-C cable for use with the Babyface Pro audio interface.
lenght: 1m
Read moreINV08804
The RME BF2USBA is a right-angle USB Type-A cable for use with the Babyface Pro audio interface. Read moreINV08805
1 kO resister, IEC Connector, In 100-240V/50-60 Hz, Out 12V/2A Read moreINV08855
Designed for musicians and performers who demand mobility without compromising audio quality, the HP2 stereo personal headphone amplifier is a great choice for driving wired in-ear monitors (IEMs), as well as headphones. Portable and compact, it offers two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control and can be powered by a 9V battery or a DC power supply. Operation can be switched between stereo and mono, and a Pan knob is provided. A 2m audio cable is included.
- Battery-powered, stereo headphone amplifier
- Inputs: 2 female XLR connectors
- Output: stereo, 1/8" phone connector
- Power: 9V battery or DC power supply
- Volume and Pan control knobs
INV08856
Tired of straining to hear underpowered headphones? The PreSonus® HP4 headphone-distribution system is louder than you're ever likely to need for session and stage use. (Be careful with that level control!) Yet the sound is clear and clean, with a wide dynamic range. At last, everybody will be able to hear!
Simplicity is the HP4's hallmark. It offers left and right line inputs, left and right line outputs with level control, and four headphone outs. You can sum the stereo signals to mono, adjust the individual headphone levels, and mute the rear-panel Monitor outputs while leaving the headphone outputs active. So while the HP4 is simple to set up and use, it has all the features you need to create a versatile headphone system.
The compact HP4 can sit on a tabletop or can be screw-mounted to a standard rack tray (not included), where it requires just one-third of a rackspace. If your needs grow, you can use the line outputs to feed the inputs of a second HP4 or the larger HP60 headphone amplifier.
So quit struggling with mediocre headphone amps. Get the PreSonus HP4 and hear everything loud and clear. You
- 4 screaming-loud (130 mW per channel) stereo ¼-inch headphone outputs (front panel
- 2 balanced ¼-inch line outputs (monitor outputs)
- 2 balanced ¼-inch line inputs
- Headphone level control for each channel
- Mono summing switch for each channel
- Monitor level control and mute switch
- Daisy-chain multiple units via monitor outputs
- Compact 1/3U rack-mount chassis
- Sealed, detented, metal rotary controls
- External 16 VAC power supply
