Effects

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

MXR and Third Man Hardware have teamed up to create the perfect booster for gigging guitar players—this pedal combines two separate MXR Micro Amp circuits into a single box so that you can heat up two separate signal chains with just the right amount of classic Micro Amp bump.

This pedal is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ ECB003EU, or an MXR Brick Series power supply.

The POWER BURST is a simple booster with one knob and three modes, providing a natural sense of compression and saturation. While maintaining a natural tone, it goes beyond merely increasing volume. By turning the Boost knob, it brings forth a “tube-like” compression and saturation. Whether you want to push forward during a guitar solo, add power without altering the sound character of other equipment when combined with this unit, or exert influence when seeking a harder edge in your sound, the POWER BURST is an effect pedal that delivers.

The POWER BURST brings a sound with “rich sustain,” allowing for the effective expression of guitar techniques inherent in the blues, such as bending and vibrato. Moreover, cranking up the BOOST to the maximum and driving the amp creates a classic rock sound.

The Hammertone™ Fuzz captures the iconic splat, saturation and horn-like sustain used on the formative records of rock’n’roll history. Despite its small size, this purple-tinged, psychedelic stompbox is feature-packed with three classic controls, two silicon diodes and an octave fuzz mode – allowing you to recreate the legendary sounds of the ‘60s & ‘70s or forge your own unique tone.

• Fender®-Designed Fuzz Circuit
• Optional Octave-Fuzz Switch
• Top Mount Input/Output Jacks
• True-Bypass Switching
• Powered by 9-Volt Battery or Center Negative AC Adaptor, Not Included

The DOD Carcosa Fuzz is a doorway into an alternate fuzz universe, where classic tones of legend coexist with splattered and shattered Pollock abstractions. Combining the Carcosa’s wide-ranging AFTER bias control with two toggle positions creates tones that range from porcine fatness to dessicated shards. This versatility makes the Carcosa Fuzz a good companion for dirty or clean amps. True bypass, tons of output, and the visage of the King in Yellow sets the stage for fuzzy madness. The DOD Carcosa Fuzz has an exaggerated mid-range and treble character that help it stand out in a mix. It has been designed to cut through a dense and heavy band but still have great note articulation with chords. However, when extreme bias (AFTER) ranges are selected many wild and over-the-top sounds are possible.

The Super Badass Variac Fuzz is aggressive, biting, and highly versatile, featuring a Variac control to change the pedal's voltage from 5V to 15V for a range of fuzz tones. Go from vintage saggy saturation to wide open transparency with the twist of a knob.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Bassman® pedals have all your basses covered. Drawing inspiration from the original tube amp line that laid way for Fender’s sub-sonic signal processing, the Bassman pedal line hosts a collection of meticulously crafted analog and digital circuits all curated from the ground up for bass-centric tonal expansion. With three controls, two slide switches, a footswitch and top-mounted connections, the pedals are extremely user-friendly and take up little space on the pedalboard.

Thick and woolly bass fuzz for the ages: cramming decades of bass fuzz tones into a small footprint, the Bassman Fuzz pedal offers two voices of speaker-pumping grit and all the right controls to keep your low end solid. Beyond offering fur drenched, riff-ready gain, this buffer-friendly fuzz can be tamed to balance with your clean lows using the three-position focus switch and blend knob. Select where the fuzz sits in the mix from three focus frequencies: full frequency band, just the mid and high frequencies, or high frequencies only – with each setting leaving plenty of room to blend in the right amount of your clean signal underneath the fuzz.

• Voice switch selects between compressed vintage fuzz or touch-sensitive modern fuzz
• Internal tone control adjusts the high frequency content of the fuzz
• Soft-touch relay true bypass with auto bypass when no power is present
• Side mounted pad switch to suit active basses
• Top mounted jacks and road-ready aluminum enclosure
• Inset aluminum face plate draws in vintage Fender aesthetics

Thanks to its studio quality performance, powerful tone shaping EQ and rock-solid reliability, the Para DI has become an indispensable stage tool for countless musicians around the world. This roadworthy box effortlessly tames the stage and enhances any acoustic pickup for a fuller, more complex sound. The Para DI features a 5-band EQ with a tunable midrange and notch, variable gain control for passive or active pickups and a high-quality DI output for a pristine signal to the board.

• Adjustable gain for both passive and active pickups
• 5 band EQ with tunable notch and midrange bands
• Phase inversion for best sound and feedback control
• XLR and ¼" outputs
• Works with 9V battery or 48V phantom power

The AD-10 takes acoustic preamp design to an all-new level with its standout feature—BOSS’s groundbreaking Acoustic Resonance processing. This advanced tech restores the complex body and string resonances that are lost with most pickup systems, bringing back the expressive, organic vibe that’s so vital to the acoustic experience. And the features keep on coming, with transparent anti-feedback controls, memories for sound setups, an 80-second looper, USB audio, and much more. Hugely powerful yet simple to use, the compact AD-10 is your all-in-one companion for realizing impressive acoustic tones in every performing environment.

• Professional preamp/DI for performing and recording with acoustic-electric guitar
• Acoustic Resonance restores the warm and rich resonance lost with most pickup systems
• Four-band EQ and variable low-cut filter tuned to deliver optimized tone shaping for acoustic guitar
• Multi-band compressor with MDP technology provides transparent dynamics control
• Newly developed anti-feedback functions control feedback while maintaining balanced tone
• Two channels with independent EQ for connecting two instruments or blending multiple pickup sources
• Onboard ambience, delay, and chorus effects with multiple sound types and adjustable parameters
• Boost function with adjustable tone setting
• Memory function for storing 10 sound setups
• Onboard looper with 80 seconds of recording time
• XLR and ¼-inch connectivity for interfacing with PA systems, stage monitors, amps, and external effects
• USB audio interface functionality for computer recording and playback
• Fast and accurate built-in tuner
• Compact and portable design; runs on AC adapter or six AA-size batteries