PA & Studio Equipment

FBT ProMaxx 15a Active Subwoofer - B&C neodymium driver, switched mode amp, 1200W, 38-120Hz, 136 dB SPL max, XLR in/out, volume, HP filter, ground lift switch, DSP with 8 EQ presets, 180° phase reverse, 15mm plywood housing, M20 thread. Dimensions: 507 x 585 x 605mm. Weight: 28.5kg Read more

The Evo2MaxX 2a is an active 10" speaker with a B&C 1" compression driver Featuring a 400W + 100W RMS 128dB SPLwith all new DSP encapsulated in a sturdy, gas-injected polypropylene molded enclosure.

• 2-way, bi-amplified, bass reflex design cabinet.
• 250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT.
• 25mm (1”) throat exit B&C HF compression driver.
• Frequency response from 58Hz to 20 kHz.
• Biamped: 400w RMS LF, 100w RMS HF, Class D power amplifiers with switch mode power supplies.
• Digital Signal Processor with 4 Equalization Presets.
• Control Panel: features balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3 status LED indicators.
• 90°H x 60°V Constant Directivity Horn.
• Sturdy gas-injected polypropylene molded enclosure with one integrated handle and Stage Floor Monitor taper.
• 2 x M10 suspension points, 35mm (1⅜”) top-hat speaker stand socket, wall bracket mount flange plate.
• Enclosure suitable for stacking.
• Extremely light, Net Wt. only 12 kg.

Read more

The J15a is an Active speaker featuring a 15" Driver and a 1" Compression driver This italian made speaker features a rugged gas injected molded polypropylene cabinet with a DSP processed amplifier delivering 350W+ 100W RMS – 129DB SPL and a standard 35mm pole mount.

• 2-way processed active system
• Polypropylene enclosure
• 1 x 15" custom woofer
• 1 x 1" neodymium silk dome tweeter
• 300W/70W built-in amplifier cont. RMS LF/HF
• 350W/100W built-in amplifier max. RMS LF/HF
• 700W/200W built-in amplifier max. peak LF/HF
• 2 x M10 suspension points
• 4 DSPpresets
• Completely manufactured in Italy

Read more

FBT J-Series J12a Active Full Range Speaker - 12"+1" Driver, biamped switched mode amp, 350W LF + 100W HF RMS class-D, 50Hz-20kHz, 90° x 60°, internal DSP with 4 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 410 x 663 x 387mm. Weight: 13,7 kg, Optional cover 239852 Read more

FBT J-Series J8a Active Full Range Speaker - 8"+1" Driver, biamped switched mode amp, 200W LF + 50W HF RMS class-D,60Hz-20kHz, 90° x 60°, internal DSP with 2 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M5 flying points, 25mm pole mount, black plastic housing. Dimensions: 255 x 415 x 245mm. Weight: 8,2 kg, Optional cover 178863 Read more

The FBT XPRO 115A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected moulded plywood cabinet construction. The asymmetrical shape of the FBT XPRO 115A cabinet also allows use as a powered floor stage monitor. 

• 2-way bi-amplified system in bass reflex 
• Plywood cabinet 
• Woofer custom 15” (LF) woofer / 2.5” voice coil 
• 1” throat / 1,4” voice coil HF compression driver 
• 1200/300W built-in amplifier max (LF/HF) 
• Bluetooth 5.0 
• 3-channels mixer 
• 4 DSP presets 
• 80° H x 50° V rotatable constant directivity horn 
• 35° or 45° monitor taper 
• Universal switching mode power supply 100-240Vac 
• M10 rigging points

Read more

ORIGINAL: general preset, suitable for the majority of uses. Low pass filter is set at 95Hz, peak limiter is adjusted for getting the perfect balance between high SPL and low distortion DEEP: this preset extends and boosts subwoofer low range to approx. 40Hz. Low pass filter is set at 95Hz, peak limiter is extremely fast and guarantees to remove almost completely the distortion due to amplifier clipping. This necessarily causes little reduction in maximum SPL. Generally recommended for applications requiring extremely pure sound and maximum low frequency extension. PUNCH: Preset providing maximum power concentration in the 60 – 95Hz frequency range. Perfect for rock music and high power applications. Distortion is slightly higher, since it is less limited by the peak limiter, while sound pressure level increases. Low pass filter is set at 95Hz. INFRA: Similar to DEEP as for the extension and absence of distortion. It differs for low pass filter setting at 75Hz. This allows for ground-stacked use of the subwoofer in applications featuring also a flying subwoofer. Thanks to the all pass filter for phase alignment, the frequency overlap in the 50Hz – 75Hz range for the two subwoofers is perfectly in phase. Read more

Read more

PROCESSED ACTIVE SPEAKER 700W RMS + 200W RMS 133DB SPL

PROMAXX offers 6 presets to cater for a broad variety of uses, each crafted by FBT engineers. Employing powerful DSP, the presets ensure reliability while eliminating distortion.

• ORIGINAL / LIVE - The renowned, smooth FBT sound
• VOCAL - A special EQ setting to maximise speech intelligibility
• DJ - Designed to keep the energy high and your audience dancing
• TOURING - The reliability and the roar of the industry’s most popular touring systems
• LOUDNESS - The ultimate preset for listening at a medium or low volume
• WARM - A special setting to emphasise full-bodied, low-mid frequencies.

Read more

 PROMAXX offers 6 presets to cater for a broad variety of uses, each crafted by FBT engineers. Employing powerful DSP, the presets ensure reliability while eliminating distortion. 

• ORIGINAL / LIVE  - The renowned, smooth FBT sound 
• VOCAL  - A special EQ setting to maximise speech intelligibility  
• DJ - Designed to keep the energy high and your audience dancing  
• TOURING - The reliability and the roar of the industry’s most popular touring systems 
• LOUDNESS - The ultimate preset for listening at a medium or low volume  
• WARM - A special setting to emphasise full-bodied, low-mid frequencies. 

Read more