(+372) 6 31 38 36   info@muusik.ee

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

PA & Studio Equipment

Set Descending Direction

   

Items 111 to 120 of 140 total

  1. 20W+20W Stereo Valve Power Amplifier.

    • 2x20W lamps
    • Fan in front
    • 1xECC82 2xECC83 and pre-amplification
    • 4xEL84 in power stage
    • 2 entries Jack 6.35
    • Jack 6.35 6 outputs (2 line out, 2 outputs 8ohms, 16ohms 2 outputs)
    • Remote control socket for the Deep function.
    Read more
  2. Marshall EL34 50/50 Head Valve Kit Fitted with 2 Electro Harmonix EL34 Platinum Matched Quartets output valves and Electro Harmonix pre-amp valves.

    • 4 x Electro Harmonix EL34 Platinum Single
    • 2 x Electro Harmonix ECC83/12AX7
    • 2 x Electro Harmonix ECC81/12AT7

    We recommend this set of valves that we regard them as a great upgrade to the stock valves fitted In the Marshall EL34 50/50 Head. You will experience Excellent tonal balance, harmonic content, low noise floor, and low microphonics ,with Nice, warm tone. We recommend that you check your BIAS setting when fitting the output.

    Read more
  3. 300 Watt Mixing Amplifier with Reverb and Delay

    • 300 W RMS
    • Channels 6 / Lo-Z ZLR & Hi-Z jack inputs
    • Record Out 
    • Footswitch FS1 (Not included)
    • Speaker connections 2 x jack
    • Impedance 4Ω
    • 3 x Reverbs,
    • 3 x Delay
    • Limiter
    • CD Input, Phono + Level Control
    • Weight 11 Kg
    • Dimensions (mm) 471 x 174 x 264
    • Channel Controls:  Bass, Middle, Treble, Gain, Monitor, FX level
    • Master Section: 7 band graphic EQ, Master Volume, Peak status light
    Read more
  4. The KA Amplifier Series is the result of many hours of testing and performance involving Kempton’s tech staff and users. The results are a sophisticated power amp circuit design featuring high power, superb quality, reliability and stability to provide the highest possible sound performance.

    • Sophisticated protection circuits prevent improper tampering.
    • A variable low noise, high speed fan provides for improved heat dissipation and to prevent thermal shutdowns.
    • Balanced XLR and Jack input connectors.
    • Professional 4-pin speakon and binding posts outputs.
    • Stereo-Parallel-Bridge modes via switch.
    • Selectable clipping control / limiter function switch.
    • Selectable built-in 30Hz low pass filter to protect speaker systems from damage caused by subsonic frequencies.
    • LED indicators for the output balance, as well as LED status indicators of signal (SIG) and clipping (CLIP).
    • 2-unit 19" rack space design for universal rack mount installations.
    Read more
  5. Although you could play an arena rock concert with much less than the DV Mark G 1000’s impressive 1000 watts, having so much power at your disposal allows you to play with incredible dynamics and enables your cabinets to handle high signal peaks without clipping. Read more
  6. INV00138

    FBT J-Series J5a w, active Full Range Speaker - 5"+1" Driver, biamped switched mode amp, 80W LF + 40W HF RMS class-D, 80Hz-20kHz, 90° x 90°, wedge angles, XLR in/out, volume, 4x M5 flying points, white plastic housing. Dimensions: 170 x 275 x 180mm. Weight: 3,4 kg Read more
  7. Thanks to its studio quality performance, powerful tone shaping EQ and rock-solid reliability, the Para DI has become an indispensable stage tool for countless musicians around the world. This roadworthy box effortlessly tames the stage and enhances any acoustic pickup for a fuller, more complex sound. The Para DI features a 5-band EQ with a tunable midrange and notch, variable gain control for passive or active pickups and a high-quality DI output for a pristine signal to the board.

    • Adjustable gain for both passive and active pickups
    • 5 band EQ with tunable notch and midrange bands
    • Phase inversion for best sound and feedback control
    • XLR and ¼" outputs
    • Works with 9V battery or 48V phantom power
    Read more
  8. INV05042

    2 Channel Active DI-box.

    • Frequency Response: 10Hz-25KHz
    • Noise Level -100dBu (22Hz – 22KHz,Input Shorted)
    • THD+N (10Hz – 22KHz) 0.01%typ.@1V RMS,1KHz
    • Inputs: Two 1/4" Phone Jacks, Unbalanced
    • Outputs: Two XLR connectors, Balanced
    • Link Outputs: Two 1/4" Phone Jacks, Unbalanced
    • PAD switch: 0dB, -20dB, -40dB setting / two switches
    • LIFT Switches: Two GROUND LIFT Switches
    • Dimensions: 158 x 100 x 50mm
    • Weight 0.4kg
    Read more
  9. INV05481

    Building upon decades of experience creating studio-quality gear for the stage, the Align Active DI is the embodiment of LR Baggs engineering at its highest level and uses the most pristine circuitry we have developed in a DI. Our all-discrete design preserves the authenticity of your sound while providing high headroom for a wide range of signals. Equally at home on a pedalboard or standalone, we are excited to offer a DI with such a high degree of fidelity and functionality. Read more
  10. INV07712

    Klotz Passive DI Box with custom made 100% mu-metal transformer core.

    • handmade in germany
    • handwired KLOTZ transformer with mu-metal shield for better RF isolation
    • custom made 100% mu-metal transformer core
    • transformer with a ratio of 6+6:1
    • robust and shielding stainless steel housing with hard-wearing laser engraving
    • significantly more sound-neutral and stable than other DI-boxes on the market
    • the KLOTZ AIS factory is using a 6 time quality assurance for each KLOTZ cable in accordance with ISO 9001:2015
    Read more
Set Descending Direction

   

Items 111 to 120 of 140 total