PA & Studio Equipment
INV08054
€105.00Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source.
- Premium Performance
- Rugged Design
- Stackable Chassis with Durable Rubber Foot
- Gold-plated Neutrik® XLR Connector
- Premium Chrome Toggle Switches
- Hi-Z 1/4" Input Jack
- Parallel 1/4" Thru Jack
- Transformer Isolated
- Premium Shielded Custom dbx Transformer
- Balanced XLR Lo-Z Output
- 3-Way 0/20/40 dB Pad Switch
- Flat/High-Cut Filter Switch
- Output Polarity Invert Switch
- Ground Lift Switch
- 4 Year Warranty!
INV08077
€65.00Samson's MDA1 Mono Active Direct Box combines premium sound circuitry with durable, roadworthy construction, providing high-quality signal connection solutions for live sound and recording studio applications. The MDA1 operates on either batteries or phantom power and allows clean, balanced lines to be sent from your guitars and basses.
- All-metal, impact resistant design
- 2-position 0dB/-15dB attenuation switch
- Ground Lift switch
- 1/4" Input and Thru
- Balanced XLR output
- 48V Phantom and 9V Battery power options
- Frequency response of 18Hz–35kHz
INV08078
€33.00Leem Filter Passive Direct Box With Ground Lift And Attenuator.
- Unbalanced high impedance input via 6.3mm jack
- Parallel output 6.3mm socket allows transfer of instrument signal direct to another amplifier etc
- XLRM balanced Lo-Z output
- Black anodised aluminium case
- Ground lift slide switch for hum free performance
- Switchable attenuation: 0dB, -20dB, -40dB
- Attenuation 0dB, -20dB, -40dB
- Frequency response 30Hz - 20kHz
- Max. Input Voltage 32V (Corresponds to 125W @ 8 Ohms or 250W @ 4 Ohms)
- Transmission ratio 10:1
- Dimensions 100 x 45 x 100mm
- Weight 266g
INV08079
Samson's MD2 Pro Stereo Passive Direct Box combines two premium direct boxes in a single case. Rugged, roadworthy construction and two shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications. The MD2 Pro is perfect for converting unbalanced stereo line level or instrument signals from keyboards, electronic drum kits, acoustic-electric guitars and more.
- All-metal, impact resistant design
- Dual Samson STLX Mu-Metal shielded transformers
- Stereo/Mono sum switch
- Dual 3-position 0dB/-10dB/-20dB attenuation switches
- Dual Ground Lift switches
- Dual 1/4" Inputs and Thrus
- Dual balanced XLR outputs
- No Phantom or Battery power required
- Frequency response of 18Hz–40kHz
INV00138
€269.00FBT J-Series J5a w, active Full Range Speaker - 5"+1" Driver, biamped switched mode amp, 80W LF + 40W HF RMS class-D, 80Hz-20kHz, 90° x 90°, wedge angles, XLR in/out, volume, 4x M5 flying points, white plastic housing. Dimensions: 170 x 275 x 180mm. Weight: 3,4 kg Read more11020
20W+20W Stereo Valve Power Amplifier.
- 2x20W lamps
- Fan in front
- 1xECC82 2xECC83 and pre-amplification
- 4xEL84 in power stage
- 2 entries Jack 6.35
- Jack 6.35 6 outputs (2 line out, 2 outputs 8ohms, 16ohms 2 outputs)
- Remote control socket for the Deep function.
11022
Marshall EL34 50/50 Head Valve Kit Fitted with 2 Electro Harmonix EL34 Platinum Matched Quartets output valves and Electro Harmonix pre-amp valves.
- 4 x Electro Harmonix EL34 Platinum Single
- 2 x Electro Harmonix ECC83/12AX7
- 2 x Electro Harmonix ECC81/12AT7
We recommend this set of valves that we regard them as a great upgrade to the stock valves fitted In the Marshall EL34 50/50 Head. You will experience Excellent tonal balance, harmonic content, low noise floor, and low microphonics ,with Nice, warm tone. We recommend that you check your BIAS setting when fitting the output.
Read more12275
300 Watt Mixing Amplifier with Reverb and Delay
Read more- 300 W RMS
- Channels 6 / Lo-Z ZLR & Hi-Z jack inputs
- Record Out
- Footswitch FS1 (Not included)
- Speaker connections 2 x jack
- Impedance 4Ω
- 3 x Reverbs,
- 3 x Delay
- Limiter
- CD Input, Phono + Level Control
- Weight 11 Kg
- Dimensions (mm) 471 x 174 x 264
- Channel Controls: Bass, Middle, Treble, Gain, Monitor, FX level
- Master Section: 7 band graphic EQ, Master Volume, Peak status light
13975
The KA Amplifier Series is the result of many hours of testing and performance involving Kempton’s tech staff and users. The results are a sophisticated power amp circuit design featuring high power, superb quality, reliability and stability to provide the highest possible sound performance.
- Sophisticated protection circuits prevent improper tampering.
- A variable low noise, high speed fan provides for improved heat dissipation and to prevent thermal shutdowns.
- Balanced XLR and Jack input connectors.
- Professional 4-pin speakon and binding posts outputs.
- Stereo-Parallel-Bridge modes via switch.
- Selectable clipping control / limiter function switch.
- Selectable built-in 30Hz low pass filter to protect speaker systems from damage caused by subsonic frequencies.
- LED indicators for the output balance, as well as LED status indicators of signal (SIG) and clipping (CLIP).
- 2-unit 19" rack space design for universal rack mount installations.
20786
Although you could play an arena rock concert with much less than the DV Mark G 1000’s impressive 1000 watts, having so much power at your disposal allows you to play with incredible dynamics and enables your cabinets to handle high signal peaks without clipping. Read more
Featured
